diff options
Diffstat (limited to 'setup/projects/katrin/files/etc/apache2-kaas/conf')
| -rw-r--r-- | setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf | 353 | ||||
| -rw-r--r-- | setup/projects/katrin/files/etc/apache2-kaas/conf/magic | 385 |
2 files changed, 738 insertions, 0 deletions
diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf new file mode 100644 index 0000000..88fcb97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf @@ -0,0 +1,353 @@ +# +# This is the main Apache HTTP server configuration file. It contains the +# configuration directives that give the server its instructions. +# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. +# In particular, see +# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> +# for a discussion of each configuration directive. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so 'log/access_log' +# with ServerRoot set to '/www' will be interpreted by the +# server as '/www/log/access_log', where as '/log/access_log' will be +# interpreted as '/log/access_log'. + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do not add a slash at the end of the directory path. If you point +# ServerRoot at a non-local disk, be sure to specify a local disk on the +# Mutex directive, if file-based mutexes are used. If you wish to share the +# same ServerRoot for multiple httpd daemons, you will need to change at +# least PidFile. +# +ServerRoot "/opt/rh/httpd24/root/etc/httpd" + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the <VirtualHost> +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +# +#Listen 12.34.56.78:80 +Listen 0.0.0.0:8080 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +Include conf.modules.d/*.conf + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. +# +User default +Group root + +# 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# <VirtualHost> definition. These values also provide defaults for +# any <VirtualHost> containers you may define later in the file. +# +# All of these directives may appear inside <VirtualHost> containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin root@localhost + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# +#ServerName www.example.com:80 + +# +# Deny access to the entirety of your server's filesystem. You must +# explicitly permit access to web content directories in other +# <Directory> blocks below. +# +<Directory /> + AllowOverride none + Require all denied +</Directory> + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/opt/rh/httpd24/root/var/www/html" + +# +# Relax access to content within /opt/rh/httpd24/root/var/www. +# +<Directory "/opt/rh/httpd24/root/var/www"> + AllowOverride None + # Allow open access: + Require all granted +</Directory> + +# Further relax access to the default document root: +<Directory "/opt/rh/httpd24/root/var/www/html"> + # + # Possible values for the Options directive are "None", "All", + # or any combination of: + # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews + # + # Note that "MultiViews" must be named *explicitly* --- "Options All" + # doesn't give it to you. + # + # The Options directive is both complicated and important. Please see + # http://httpd.apache.org/docs/2.4/mod/core.html#options + # for more information. + # + Options Indexes FollowSymLinks + + # + # AllowOverride controls what directives may be placed in .htaccess files. + # It can be "All", "None", or any combination of the keywords: + # Options FileInfo AuthConfig Limit + # + AllowOverride All + + # + # Controls who can get stuff from this server. + # + Require all granted +</Directory> + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +<IfModule dir_module> + DirectoryIndex index.html +</IfModule> + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# +<Files ".ht*"> + Require all denied +</Files> + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# +ErrorLog |/usr/bin/cat + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +<IfModule log_config_module> + # + # The following directives define some format nicknames for use with + # a CustomLog directive (see below). + # + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + + <IfModule logio_module> + # You need to enable mod_logio.c to use %I and %O + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + </IfModule> + + # + # The location and format of the access logfile (Common Logfile Format). + # If you do not define any access logfiles within a <VirtualHost> + # container, they will be logged here. Contrariwise, if you *do* + # define per-<VirtualHost> access logfiles, transactions will be + # logged therein and *not* in this file. + # + #CustomLog "logs/access_log" common + + # + # If you prefer a logfile with access, agent, and referer information + # (Combined Logfile Format) you can use the following directive. + # + CustomLog |/usr/bin/cat combined +</IfModule> + +<IfModule alias_module> + # + # Redirect: Allows you to tell clients about documents that used to + # exist in your server's namespace, but do not anymore. The client + # will make a new request for the document at its new location. + # Example: + # Redirect permanent /foo http://www.example.com/bar + + # + # Alias: Maps web paths into filesystem paths and is used to + # access content that does not live under the DocumentRoot. + # Example: + # Alias /webpath /full/filesystem/path + # + # If you include a trailing / on /webpath then the server will + # require it to be present in the URL. You will also likely + # need to provide a <Directory> section to allow access to + # the filesystem path. + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/opt/rh/httpd24/root/var/www/cgi-bin/" + +</IfModule> + +# +# "/opt/rh/httpd24/root/var/www/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# +<Directory "/opt/rh/httpd24/root/var/www/cgi-bin"> + AllowOverride None + Options None + Require all granted +</Directory> + +<IfModule mime_module> + # + # TypesConfig points to the file containing the list of mappings from + # filename extension to MIME-type. + # + TypesConfig /etc/mime.types + + # + # AddType allows you to add to or override the MIME configuration + # file specified in TypesConfig for specific file types. + # + #AddType application/x-gzip .tgz + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers": + # actions unrelated to filetype. These can be either built into the server + # or added with the Action directive (see below) + # + # To use CGI scripts outside of ScriptAliased directories: + # (You will also need to add "ExecCGI" to the "Options" directive.) + # + #AddHandler cgi-script .cgi + + # For type maps (negotiated resources): + #AddHandler type-map var + + # + # Filters allow you to process content before it is sent to the client. + # + # To parse .shtml files for server-side includes (SSI): + # (You will also need to add "Includes" to the "Options" directive.) + # + AddType text/html .shtml + AddOutputFilter INCLUDES .shtml +</IfModule> + +# +# Specify a default charset for all content served; this enables +# interpretation of all content as UTF-8 by default. To use the +# default browser choice (ISO-8859-1), or to allow the META tags +# in HTML content to override this choice, comment out this +# directive: +# +AddDefaultCharset UTF-8 + +<IfModule mime_magic_module> + # + # The mod_mime_magic module allows the server to use various hints from the + # contents of the file itself to determine its type. The MIMEMagicFile + # directive tells the module where the hint definitions are located. + # + MIMEMagicFile conf/magic +</IfModule> + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# EnableMMAP and EnableSendfile: On systems that support it, +# memory-mapping or the sendfile syscall may be used to deliver +# files. This usually improves server performance, but must +# be turned off when serving from networked-mounted +# filesystems or if support for these functions is otherwise +# broken on your system. +# Defaults if commented: EnableMMAP On, EnableSendfile Off +# +#EnableMMAP off +EnableSendfile on + +# Supplemental configuration +# +# Load config files in the "/etc/httpd/conf.d" directory, if any. +IncludeOptional conf.d/*.conf diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf/magic b/setup/projects/katrin/files/etc/apache2-kaas/conf/magic new file mode 100644 index 0000000..7c56119 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas/conf/magic @@ -0,0 +1,385 @@ +# Magic data for mod_mime_magic Apache module (originally for file(1) command) +# The module is described in /manual/mod/mod_mime_magic.html +# +# The format is 4-5 columns: +# Column #1: byte number to begin checking from, ">" indicates continuation +# Column #2: type of data to match +# Column #3: contents of data to match +# Column #4: MIME type of result +# Column #5: MIME encoding of result (optional) + +#------------------------------------------------------------------------------ +# Localstuff: file(1) magic for locally observed files +# Add any locally observed files here. + +#------------------------------------------------------------------------------ +# end local stuff +#------------------------------------------------------------------------------ + +#------------------------------------------------------------------------------ +# Java + +0 short 0xcafe +>2 short 0xbabe application/java + +#------------------------------------------------------------------------------ +# audio: file(1) magic for sound formats +# +# from Jan Nicolai Langfeldt <janl@ifi.uio.no>, +# + +# Sun/NeXT audio data +0 string .snd +>12 belong 1 audio/basic +>12 belong 2 audio/basic +>12 belong 3 audio/basic +>12 belong 4 audio/basic +>12 belong 5 audio/basic +>12 belong 6 audio/basic +>12 belong 7 audio/basic + +>12 belong 23 audio/x-adpcm + +# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format +# that uses little-endian encoding and has a different magic number +# (0x0064732E in little-endian encoding). +0 lelong 0x0064732E +>12 lelong 1 audio/x-dec-basic +>12 lelong 2 audio/x-dec-basic +>12 lelong 3 audio/x-dec-basic +>12 lelong 4 audio/x-dec-basic +>12 lelong 5 audio/x-dec-basic +>12 lelong 6 audio/x-dec-basic +>12 lelong 7 audio/x-dec-basic +# compressed (G.721 ADPCM) +>12 lelong 23 audio/x-dec-adpcm + +# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM" +# AIFF audio data +8 string AIFF audio/x-aiff +# AIFF-C audio data +8 string AIFC audio/x-aiff +# IFF/8SVX audio data +8 string 8SVX audio/x-aiff + +# Creative Labs AUDIO stuff +# Standard MIDI data +0 string MThd audio/unknown +#>9 byte >0 (format %d) +#>11 byte >1 using %d channels +# Creative Music (CMF) data +0 string CTMF audio/unknown +# SoundBlaster instrument data +0 string SBI audio/unknown +# Creative Labs voice data +0 string Creative\ Voice\ File audio/unknown +## is this next line right? it came this way... +#>19 byte 0x1A +#>23 byte >0 - version %d +#>22 byte >0 \b.%d + +# [GRR 950115: is this also Creative Labs? Guessing that first line +# should be string instead of unknown-endian long...] +#0 long 0x4e54524b MultiTrack sound data +#0 string NTRK MultiTrack sound data +#>4 long x - version %ld + +# Microsoft WAVE format (*.wav) +# [GRR 950115: probably all of the shorts and longs should be leshort/lelong] +# Microsoft RIFF +0 string RIFF audio/unknown +# - WAVE format +>8 string WAVE audio/x-wav +# MPEG audio. +0 beshort&0xfff0 0xfff0 audio/mpeg +# C64 SID Music files, from Linus Walleij <triad@df.lth.se> +0 string PSID audio/prs.sid + +#------------------------------------------------------------------------------ +# c-lang: file(1) magic for C programs or various scripts +# + +# XPM icons (Greg Roelofs, newt@uchicago.edu) +# ideally should go into "images", but entries below would tag XPM as C source +0 string /*\ XPM image/x-xbm 7bit + +# this first will upset you if you're a PL/1 shop... (are there any left?) +# in which case rm it; ascmagic will catch real C programs +# C or REXX program text +0 string /* text/plain +# C++ program text +0 string // text/plain + +#------------------------------------------------------------------------------ +# compress: file(1) magic for pure-compression formats (no archives) +# +# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc. +# +# Formats for various forms of compressed data +# Formats for "compress" proper have been moved into "compress.c", +# because it tries to uncompress it to figure out what's inside. + +# standard unix compress +0 string \037\235 application/octet-stream x-compress + +# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver) +0 string \037\213 application/octet-stream x-gzip + +# According to gzip.h, this is the correct byte order for packed data. +0 string \037\036 application/octet-stream +# +# This magic number is byte-order-independent. +# +0 short 017437 application/octet-stream + +# XXX - why *two* entries for "compacted data", one of which is +# byte-order independent, and one of which is byte-order dependent? +# +# compacted data +0 short 0x1fff application/octet-stream +0 string \377\037 application/octet-stream +# huf output +0 short 0145405 application/octet-stream + +# Squeeze and Crunch... +# These numbers were gleaned from the Unix versions of the programs to +# handle these formats. Note that I can only uncrunch, not crunch, and +# I didn't have a crunched file handy, so the crunch number is untested. +# Keith Waclena <keith@cerberus.uchicago.edu> +#0 leshort 0x76FF squeezed data (CP/M, DOS) +#0 leshort 0x76FE crunched data (CP/M, DOS) + +# Freeze +#0 string \037\237 Frozen file 2.1 +#0 string \037\236 Frozen file 1.0 (or gzip 0.5) + +# lzh? +#0 string \037\240 LZH compressed data + +#------------------------------------------------------------------------------ +# frame: file(1) magic for FrameMaker files +# +# This stuff came on a FrameMaker demo tape, most of which is +# copyright, but this file is "published" as witness the following: +# +0 string \<MakerFile application/x-frame +0 string \<MIFFile application/x-frame +0 string \<MakerDictionary application/x-frame +0 string \<MakerScreenFon application/x-frame +0 string \<MML application/x-frame +0 string \<Book application/x-frame +0 string \<Maker application/x-frame + +#------------------------------------------------------------------------------ +# html: file(1) magic for HTML (HyperText Markup Language) docs +# +# from Daniel Quinlan <quinlan@yggdrasil.com> +# and Anna Shergold <anna@inext.co.uk> +# +0 string \<!DOCTYPE\ HTML text/html +0 string \<!doctype\ html text/html +0 string \<HEAD text/html +0 string \<head text/html +0 string \<TITLE text/html +0 string \<title text/html +0 string \<html text/html +0 string \<HTML text/html +0 string \<!-- text/html +0 string \<h1 text/html +0 string \<H1 text/html + +# XML eXtensible Markup Language, from Linus Walleij <triad@df.lth.se> +0 string \<?xml text/xml + +#------------------------------------------------------------------------------ +# images: file(1) magic for image formats (see also "c-lang" for XPM bitmaps) +# +# originally from jef@helios.ee.lbl.gov (Jef Poskanzer), +# additions by janl@ifi.uio.no as well as others. Jan also suggested +# merging several one- and two-line files into here. +# +# XXX - byte order for GIF and TIFF fields? +# [GRR: TIFF allows both byte orders; GIF is probably little-endian] +# + +# [GRR: what the hell is this doing in here?] +#0 string xbtoa btoa'd file + +# PBMPLUS +# PBM file +0 string P1 image/x-portable-bitmap 7bit +# PGM file +0 string P2 image/x-portable-greymap 7bit +# PPM file +0 string P3 image/x-portable-pixmap 7bit +# PBM "rawbits" file +0 string P4 image/x-portable-bitmap +# PGM "rawbits" file +0 string P5 image/x-portable-greymap +# PPM "rawbits" file +0 string P6 image/x-portable-pixmap + +# NIFF (Navy Interchange File Format, a modification of TIFF) +# [GRR: this *must* go before TIFF] +0 string IIN1 image/x-niff + +# TIFF and friends +# TIFF file, big-endian +0 string MM image/tiff +# TIFF file, little-endian +0 string II image/tiff + +# possible GIF replacements; none yet released! +# (Greg Roelofs, newt@uchicago.edu) +# +# GRR 950115: this was mine ("Zip GIF"): +# ZIF image (GIF+deflate alpha) +0 string GIF94z image/unknown +# +# GRR 950115: this is Jeremy Wohl's Free Graphics Format (better): +# FGF image (GIF+deflate beta) +0 string FGF95a image/unknown +# +# GRR 950115: this is Thomas Boutell's Portable Bitmap Format proposal +# (best; not yet implemented): +# PBF image (deflate compression) +0 string PBF image/unknown + +# GIF +0 string GIF image/gif + +# JPEG images +0 beshort 0xffd8 image/jpeg + +# PC bitmaps (OS/2, Windoze BMP files) (Greg Roelofs, newt@uchicago.edu) +0 string BM image/bmp +#>14 byte 12 (OS/2 1.x format) +#>14 byte 64 (OS/2 2.x format) +#>14 byte 40 (Windows 3.x format) +#0 string IC icon +#0 string PI pointer +#0 string CI color icon +#0 string CP color pointer +#0 string BA bitmap array + +0 string \x89PNG image/png +0 string FWS application/x-shockwave-flash +0 string CWS application/x-shockwave-flash + +#------------------------------------------------------------------------------ +# lisp: file(1) magic for lisp programs +# +# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com) +0 string ;; text/plain 8bit +# Emacs 18 - this is always correct, but not very magical. +0 string \012( application/x-elc +# Emacs 19 +0 string ;ELC\023\000\000\000 application/x-elc + +#------------------------------------------------------------------------------ +# mail.news: file(1) magic for mail and news +# +# There are tests to ascmagic.c to cope with mail and news. +0 string Relay-Version: message/rfc822 7bit +0 string #!\ rnews message/rfc822 7bit +0 string N#!\ rnews message/rfc822 7bit +0 string Forward\ to message/rfc822 7bit +0 string Pipe\ to message/rfc822 7bit +0 string Return-Path: message/rfc822 7bit +0 string Path: message/news 8bit +0 string Xref: message/news 8bit +0 string From: message/rfc822 7bit +0 string Article message/news 8bit +#------------------------------------------------------------------------------ +# msword: file(1) magic for MS Word files +# +# Contributor claims: +# Reversed-engineered MS Word magic numbers +# + +0 string \376\067\0\043 application/msword +0 string \333\245-\0\0\0 application/msword + +# disable this one because it applies also to other +# Office/OLE documents for which msword is not correct. See PR#2608. +#0 string \320\317\021\340\241\261 application/msword + + + +#------------------------------------------------------------------------------ +# printer: file(1) magic for printer-formatted files +# + +# PostScript +0 string %! application/postscript +0 string \004%! application/postscript + +# Acrobat +# (due to clamen@cs.cmu.edu) +0 string %PDF- application/pdf + +#------------------------------------------------------------------------------ +# sc: file(1) magic for "sc" spreadsheet +# +38 string Spreadsheet application/x-sc + +#------------------------------------------------------------------------------ +# tex: file(1) magic for TeX files +# +# XXX - needs byte-endian stuff (big-endian and little-endian DVI?) +# +# From <conklin@talisman.kaleida.com> + +# Although we may know the offset of certain text fields in TeX DVI +# and font files, we can't use them reliably because they are not +# zero terminated. [but we do anyway, christos] +0 string \367\002 application/x-dvi +#0 string \367\203 TeX generic font data +#0 string \367\131 TeX packed font data +#0 string \367\312 TeX virtual font data +#0 string This\ is\ TeX, TeX transcript text +#0 string This\ is\ METAFONT, METAFONT transcript text + +# There is no way to detect TeX Font Metric (*.tfm) files without +# breaking them apart and reading the data. The following patterns +# match most *.tfm files generated by METAFONT or afm2tfm. +#2 string \000\021 TeX font metric data +#2 string \000\022 TeX font metric data +#>34 string >\0 (%s) + +# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com) +#0 string \\input\ texinfo Texinfo source text +#0 string This\ is\ Info\ file GNU Info text + +# correct TeX magic for Linux (and maybe more) +# from Peter Tobias (tobias@server.et-inf.fho-emden.de) +# +0 leshort 0x02f7 application/x-dvi + +# RTF - Rich Text Format +0 string {\\rtf application/rtf + +#------------------------------------------------------------------------------ +# animation: file(1) magic for animation/movie formats +# +# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8) +# MPEG file +0 string \000\000\001\263 video/mpeg +# +# The contributor claims: +# I couldn't find a real magic number for these, however, this +# -appears- to work. Note that it might catch other files, too, +# so BE CAREFUL! +# +# Note that title and author appear in the two 20-byte chunks +# at decimal offsets 2 and 22, respectively, but they are XOR'ed with +# 255 (hex FF)! DL format SUCKS BIG ROCKS. +# +# DL file version 1 , medium format (160x100, 4 images/screen) +0 byte 1 video/unknown +0 byte 2 video/unknown +# Quicktime video, from Linus Walleij <triad@df.lth.se> +# from Apple quicktime file format documentation. +4 string moov video/quicktime +4 string mdat video/quicktime + |