diff options
Diffstat (limited to 'tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh')
| -rwxr-xr-x | tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh deleted file mode 100755 index 5a4e582..0000000 --- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh +++ /dev/null @@ -1,325 +0,0 @@ -#!/bin/bash - -###################### by Michele Caselle and Uros Stafanovic ################################################## -############ Resent procedure and camera initialization for 10 -bit mode ###################################### - -error=0 -echo " Reset Readout and CMOSIS " -pci -w 0x9040 80000204 -sleep .1 -#echo " Release Reset for Readout" -#pci -w 0x9040 800001e0 -sleep .1 -##################### PLL SET ##################################### -val=f501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -echo " Start CMOSIS Configuration .." -pci -w 0x9000 f301 -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "bf301" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=d207 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -# Michele 10 - 12 bit mode # -# ################################################################################################### -echo " 10 - bit mode, set Bit_mode " -val=ef00 ###################################################### -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# Michele set ADC_resolution @ 12 bits -echo " 10 bit mode, set ADC resolution 10 bits " -val=f000 # qui for 10 - 11 - 12 bits ######################################################## -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -# adc recommended 28=44 -val=e72c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val " - error=1 - # exit -fi -sleep 0.01 -# #################################################################################################### - -################# CAMERA CONFIGURATION ############################################ -val=e603 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 - -val=d404 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=d501 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# recommended is d840 -val=d840 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -# sleep 0.01 -# recommended is db40 -val=db40 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -val=de65 -# val=de0 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -sleep 0.01 -val=df6a -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -echo " End CMOSIS Configuration .." -######################################################################################################## -echo " Write exp time......" - -######################################### EXP TIME ####################################################### -val=aa25 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# val=ab2c -val=ab00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -# val=acaa -val=ac00 -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -#################################################################################################################### - -sleep 0.01 -#pci -w 0x9040 80000201 -sleep 0.01 -########################## WRITE THE READOUT NUMBER OF LINE ####################################################### -pci -w cmosis_number_lines 2047 -#pci -w number_lines 8 -sleep 0.01 -################################################################################################################# -pci --start-dma dma1 -sleep 0.01 -#VRAMP 6c is 108 -val=e26c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -#VRAMP 6c is 108 -val=e36c -pci -w 0x9000 $val -sleep 0.01 -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -sleep 0.01 -###################################### NUMBER OF OUTPUT ############################################################ -##pci -w 0x9000 0xc803 -sleep 0.01 -val=c800 -pci -w 0x9000 $val -#pci -r 0x9000 -s 10 -sleep 0.01 -value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8` -if [ "$value" != "b$val" ]; then - echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val" - error=1 - # exit -fi -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd011 -sleep 0.01 -#pci -r 0x9000 -s 10 - -sleep 0.01 -#pci -w 0x9000 0xd111 -######################################################################################################### -sleep 0.01 - - - -################################################## -#SET the max number of frame in DDR -pci -w 0x91a0 0x71 - -#echo " Reset Readout and CMOSIS " -pci -w 0x9040 0x80000204 -sleep .1 -echo " Release Reset for Readout" -pci -w 0x9040 0x80000201 -sleep .1 - -status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'` -if [ "$status" != "8449ffff0f0010013ffff111" ]; then - echo "--------------------------------->>>> ERROR! in the camera status ... " - error=1 - # exit -fi - -#echo "--> $status" - -if [ "$error" = "1" ]; then - echo " Error in the reset and initialization" -else - echo " Camera READY ........................... OK" -fi -echo - -echo "DMA reset ... " -pci --stop-dma dma1 -sleep 0.5 -pci --start-dma dma1 - - |