summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--utils/docs/man/man1/atomic-openshift-installer.118
-rw-r--r--utils/docs/man/man1/atomic-openshift-installer.1.asciidoc.in6
-rw-r--r--utils/src/ooinstall/cli_installer.py447
-rw-r--r--utils/src/ooinstall/oo_config.py8
-rw-r--r--utils/src/ooinstall/openshift_ansible.py9
-rw-r--r--utils/src/ooinstall/utils.py11
-rw-r--r--utils/test/cli_installer_tests.py59
-rw-r--r--utils/test/fixture.py17
8 files changed, 328 insertions, 247 deletions
diff --git a/utils/docs/man/man1/atomic-openshift-installer.1 b/utils/docs/man/man1/atomic-openshift-installer.1
index 4da82191b..072833ce8 100644
--- a/utils/docs/man/man1/atomic-openshift-installer.1
+++ b/utils/docs/man/man1/atomic-openshift-installer.1
@@ -2,12 +2,12 @@
.\" Title: atomic-openshift-installer
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
-.\" Date: 09/28/2016
+.\" Date: 10/20/2016
.\" Manual: atomic-openshift-installer
.\" Source: atomic-openshift-utils 1.3
.\" Language: English
.\"
-.TH "ATOMIC\-OPENSHIFT\-I" "1" "09/28/2016" "atomic\-openshift\-utils 1\&.3" "atomic\-openshift\-installer"
+.TH "ATOMIC\-OPENSHIFT\-I" "1" "10/20/2016" "atomic\-openshift\-utils 1\&.3" "atomic\-openshift\-installer"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
@@ -121,6 +121,17 @@ Show the usage help and exit\&.
\fBupgrade\fR
.RE
.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+\fBscaleup\fR
+.RE
+.sp
The options specific to each command are described in the following sections\&.
.SH "INSTALL"
.sp
@@ -158,6 +169,9 @@ Upgrade to the latest major version\&. For example, if you are running version
then this could upgrade you to
\fB3\&.3\fR\&.
.RE
+.SH "SCALEUP"
+.sp
+The \fBscaleup\fR command is used to add new nodes to an existing cluster\&. This command has no additional options\&.
.SH "FILES"
.sp
\fB~/\&.config/openshift/installer\&.cfg\&.yml\fR \(em Installer configuration file\&. Can be used to generate an inventory later or start an unattended installation\&.
diff --git a/utils/docs/man/man1/atomic-openshift-installer.1.asciidoc.in b/utils/docs/man/man1/atomic-openshift-installer.1.asciidoc.in
index 64e5d14a3..9b02c4d14 100644
--- a/utils/docs/man/man1/atomic-openshift-installer.1.asciidoc.in
+++ b/utils/docs/man/man1/atomic-openshift-installer.1.asciidoc.in
@@ -73,6 +73,7 @@ COMMANDS
* **install**
* **uninstall**
* **upgrade**
+* **scaleup**
The options specific to each command are described in the following
sections.
@@ -122,6 +123,11 @@ Upgrade to the latest major version. For example, if you are running
version **3.2** then this could upgrade you to **3.3**.
+SCALEUP
+-------
+
+The **scaleup** command is used to add new nodes to an existing cluster.
+This command has no additional options.
FILES
-----
diff --git a/utils/src/ooinstall/cli_installer.py b/utils/src/ooinstall/cli_installer.py
index 85f18d5d3..7814e4689 100644
--- a/utils/src/ooinstall/cli_installer.py
+++ b/utils/src/ooinstall/cli_installer.py
@@ -1,28 +1,24 @@
-# TODO: Temporarily disabled due to importing old code into openshift-ansible
-# repo. We will work on these over time.
-# pylint: disable=bad-continuation,missing-docstring,no-self-use,invalid-name,no-value-for-parameter,too-many-lines
+# pylint: disable=missing-docstring,no-self-use,no-value-for-parameter,too-many-lines
+import logging
import os
-import re
import sys
-import logging
+
import click
from pkg_resources import parse_version
-from ooinstall import openshift_ansible
-from ooinstall.oo_config import OOConfig
-from ooinstall.oo_config import OOConfigInvalidHostError
-from ooinstall.oo_config import Host, Role
+from ooinstall import openshift_ansible, utils
+from ooinstall.oo_config import Host, OOConfig, OOConfigInvalidHostError, Role
from ooinstall.variants import find_variant, get_variant_version_combos
-installer_log = logging.getLogger('installer')
-installer_log.setLevel(logging.CRITICAL)
-installer_file_handler = logging.FileHandler('/tmp/installer.txt')
-installer_file_handler.setFormatter(
+INSTALLER_LOG = logging.getLogger('installer')
+INSTALLER_LOG.setLevel(logging.CRITICAL)
+INSTALLER_FILE_HANDLER = logging.FileHandler('/tmp/installer.txt')
+INSTALLER_FILE_HANDLER.setFormatter(
logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s'))
# Example output:
# 2016-08-23 07:34:58,480 - installer - DEBUG - Going to 'load_system_facts'
-installer_file_handler.setLevel(logging.DEBUG)
-installer_log.addHandler(installer_file_handler)
+INSTALLER_FILE_HANDLER.setLevel(logging.DEBUG)
+INSTALLER_LOG.addHandler(INSTALLER_FILE_HANDLER)
DEFAULT_ANSIBLE_CONFIG = '/usr/share/atomic-openshift-utils/ansible.cfg'
QUIET_ANSIBLE_CONFIG = '/usr/share/atomic-openshift-utils/ansible-quiet.cfg'
@@ -58,17 +54,8 @@ def validate_ansible_dir(path):
# raise click.BadParameter("Path \"{}\" doesn't exist".format(path))
-def is_valid_hostname(hostname):
- if not hostname or len(hostname) > 255:
- return False
- if hostname[-1] == ".":
- hostname = hostname[:-1] # strip exactly one dot from the right, if present
- allowed = re.compile(r"(?!-)[A-Z\d-]{1,63}(?<!-)$", re.IGNORECASE)
- return all(allowed.match(x) for x in hostname.split("."))
-
-
def validate_prompt_hostname(hostname):
- if hostname == '' or is_valid_hostname(hostname):
+ if hostname == '' or utils.is_valid_hostname(hostname):
return hostname
raise click.BadParameter('Invalid hostname. Please double-check this value and re-enter it.')
@@ -84,7 +71,7 @@ passwordless sudo access.
return click.prompt('User for ssh access', default='root')
-def get_master_routingconfig_subdomain():
+def get_routingconfig_subdomain():
click.clear()
message = """
You might want to override the default subdomain used for exposed routes. If you don't know what this is, use the default value.
@@ -183,8 +170,9 @@ http://docs.openshift.com/enterprise/latest/architecture/infrastructure_componen
if masters_set or num_masters != 2:
more_hosts = click.confirm('Do you want to add additional hosts?')
- if num_masters >= 3:
- collect_master_lb(hosts)
+ master_lb = collect_master_lb(hosts)
+ if master_lb:
+ hosts.append(master_lb)
roles.add('master_lb')
if not existing_env:
@@ -193,7 +181,8 @@ http://docs.openshift.com/enterprise/latest/architecture/infrastructure_componen
return hosts, roles
-def print_installation_summary(hosts, version=None):
+# pylint: disable=too-many-branches
+def print_installation_summary(hosts, version=None, verbose=True):
"""
Displays a summary of all hosts configured thus far, and what role each
will play.
@@ -214,35 +203,36 @@ def print_installation_summary(hosts, version=None):
click.echo('Total OpenShift masters: %s' % len(masters))
click.echo('Total OpenShift nodes: %s' % len(nodes))
- if len(masters) == 1 and version != '3.0':
- ha_hint_message = """
+ if verbose:
+ if len(masters) == 1 and version != '3.0':
+ ha_hint_message = """
NOTE: Add a total of 3 or more masters to perform an HA installation."""
- click.echo(ha_hint_message)
- elif len(masters) == 2:
- min_masters_message = """
+ click.echo(ha_hint_message)
+ elif len(masters) == 2:
+ min_masters_message = """
WARNING: A minimum of 3 masters are required to perform an HA installation.
Please add one more to proceed."""
- click.echo(min_masters_message)
- elif len(masters) >= 3:
- ha_message = """
+ click.echo(min_masters_message)
+ elif len(masters) >= 3:
+ ha_message = """
NOTE: Multiple masters specified, this will be an HA deployment with a separate
etcd cluster. You will be prompted to provide the FQDN of a load balancer and
a host for storage once finished entering hosts.
-"""
- click.echo(ha_message)
+ """
+ click.echo(ha_message)
- dedicated_nodes_message = """
+ dedicated_nodes_message = """
WARNING: Dedicated nodes are recommended for an HA deployment. If no dedicated
nodes are specified, each configured master will be marked as a schedulable
node."""
- min_ha_nodes_message = """
+ min_ha_nodes_message = """
WARNING: A minimum of 3 dedicated nodes are recommended for an HA
deployment."""
- if len(dedicated_nodes) == 0:
- click.echo(dedicated_nodes_message)
- elif len(dedicated_nodes) < 3:
- click.echo(min_ha_nodes_message)
+ if len(dedicated_nodes) == 0:
+ click.echo(dedicated_nodes_message)
+ elif len(dedicated_nodes) < 3:
+ click.echo(min_ha_nodes_message)
click.echo('')
@@ -270,6 +260,8 @@ def print_host_summary(all_hosts, host):
click.echo(" - Etcd (Embedded)")
if host.is_storage():
click.echo(" - Storage")
+ if host.new_host:
+ click.echo(" - NEW")
def collect_master_lb(hosts):
@@ -307,14 +299,18 @@ hostname.
'please specify a separate host' % hostname)
return hostname
- host_props['connect_to'] = click.prompt('Enter hostname or IP address',
- value_proc=validate_prompt_lb)
- install_haproxy = \
- click.confirm('Should the reference HAProxy load balancer be installed on this host?')
- host_props['preconfigured'] = not install_haproxy
- host_props['roles'] = ['master_lb']
- master_lb = Host(**host_props)
- hosts.append(master_lb)
+ lb_hostname = click.prompt('Enter hostname or IP address',
+ value_proc=validate_prompt_lb,
+ default='')
+ if lb_hostname:
+ host_props['connect_to'] = lb_hostname
+ install_haproxy = \
+ click.confirm('Should the reference HAProxy load balancer be installed on this host?')
+ host_props['preconfigured'] = not install_haproxy
+ host_props['roles'] = ['master_lb']
+ return Host(**host_props)
+ else:
+ return None
def collect_storage_host(hosts):
@@ -395,29 +391,29 @@ Notes:
default_facts_lines = []
default_facts = {}
- for h in hosts:
- if h.preconfigured:
+ for host in hosts:
+ if host.preconfigured:
continue
try:
- default_facts[h.connect_to] = {}
- h.ip = callback_facts[h.connect_to]["common"]["ip"]
- h.public_ip = callback_facts[h.connect_to]["common"]["public_ip"]
- h.hostname = callback_facts[h.connect_to]["common"]["hostname"]
- h.public_hostname = callback_facts[h.connect_to]["common"]["public_hostname"]
+ default_facts[host.connect_to] = {}
+ host.ip = callback_facts[host.connect_to]["common"]["ip"]
+ host.public_ip = callback_facts[host.connect_to]["common"]["public_ip"]
+ host.hostname = callback_facts[host.connect_to]["common"]["hostname"]
+ host.public_hostname = callback_facts[host.connect_to]["common"]["public_hostname"]
except KeyError:
- click.echo("Problem fetching facts from {}".format(h.connect_to))
+ click.echo("Problem fetching facts from {}".format(host.connect_to))
continue
- default_facts_lines.append(",".join([h.connect_to,
- h.ip,
- h.public_ip,
- h.hostname,
- h.public_hostname]))
- output = "%s\n%s" % (output, ",".join([h.connect_to,
- h.ip,
- h.public_ip,
- h.hostname,
- h.public_hostname]))
+ default_facts_lines.append(",".join([host.connect_to,
+ host.ip,
+ host.public_ip,
+ host.hostname,
+ host.public_hostname]))
+ output = "%s\n%s" % (output, ",".join([host.connect_to,
+ host.ip,
+ host.public_ip,
+ host.hostname,
+ host.public_hostname]))
output = "%s\n%s" % (output, notes)
click.echo(output)
@@ -534,7 +530,7 @@ def error_if_missing_info(oo_cfg):
oo_cfg.settings['variant_version'] = version.name
# check that all listed host roles are included
- listed_roles = get_host_roles_set(oo_cfg)
+ listed_roles = oo_cfg.get_host_roles_set()
configured_roles = set([role for role in oo_cfg.deployment.roles])
if listed_roles != configured_roles:
missing_info = True
@@ -544,16 +540,7 @@ def error_if_missing_info(oo_cfg):
sys.exit(1)
-def get_host_roles_set(oo_cfg):
- roles_set = set()
- for host in oo_cfg.deployment.hosts:
- for role in host.roles:
- roles_set.add(role)
-
- return roles_set
-
-
-def get_proxy_hostnames_and_excludes():
+def get_proxy_hosts_excludes():
message = """
If a proxy is needed to reach HTTP and HTTPS traffic, please enter the
name below. This proxy will be configured by default for all processes
@@ -635,7 +622,8 @@ https://docs.openshift.com/enterprise/latest/admin_guide/install/prerequisites.h
click.clear()
if 'master_routingconfig_subdomain' not in oo_cfg.deployment.variables:
- oo_cfg.deployment.variables['master_routingconfig_subdomain'] = get_master_routingconfig_subdomain()
+ oo_cfg.deployment.variables['master_routingconfig_subdomain'] = \
+ get_routingconfig_subdomain()
click.clear()
# Are any proxy vars already presisted?
@@ -644,7 +632,7 @@ https://docs.openshift.com/enterprise/latest/admin_guide/install/prerequisites.h
saved_proxy_vars = [pv for pv in proxy_vars
if oo_cfg.deployment.variables.get(pv, 'UNSET') is not 'UNSET']
- installer_log.debug("Evaluated proxy settings, found %s presisted values",
+ INSTALLER_LOG.debug("Evaluated proxy settings, found %s presisted values",
len(saved_proxy_vars))
current_version = parse_version(
oo_cfg.settings.get('variant_version', '0.0'))
@@ -654,8 +642,8 @@ https://docs.openshift.com/enterprise/latest/admin_guide/install/prerequisites.h
# recognizes proxy parameters. We must prompt the user for values
# if this conditional is true.
if not saved_proxy_vars and current_version >= min_version:
- installer_log.debug("Prompting user to enter proxy values")
- http_proxy, https_proxy, proxy_excludes = get_proxy_hostnames_and_excludes()
+ INSTALLER_LOG.debug("Prompting user to enter proxy values")
+ http_proxy, https_proxy, proxy_excludes = get_proxy_hosts_excludes()
oo_cfg.deployment.variables['proxy_http'] = http_proxy
oo_cfg.deployment.variables['proxy_https'] = https_proxy
oo_cfg.deployment.variables['proxy_exclude_hosts'] = proxy_excludes
@@ -709,82 +697,64 @@ def is_installed_host(host, callback_facts):
return version_found
-# pylint: disable=too-many-branches
-# This pylint error will be corrected shortly in separate PR.
-def get_hosts_to_run_on(oo_cfg, callback_facts, unattended, force, verbose):
-
- # Copy the list of existing hosts so we can remove any already installed nodes.
- hosts_to_run_on = list(oo_cfg.deployment.hosts)
+def get_hosts_to_run_on(oo_cfg, callback_facts, unattended, force):
+ """
+ We get here once there are hosts in oo_cfg and we need to find out what
+ state they are in. There are several different cases that might occur:
+
+ 1. All hosts in oo_cfg are uninstalled. In this case, we should proceed
+ with a normal installation.
+ 2. All hosts in oo_cfg are installed. In this case, ask the user if they
+ want to force reinstall or exit. We can also hint in this case about
+ the scaleup workflow.
+ 3. Some hosts are installed and some are uninstalled. In this case, prompt
+ the user if they want to force (re)install all hosts specified or direct
+ them to the scaleup workflow and exit.
+ """
+ hosts_to_run_on = []
# Check if master or nodes already have something installed
- installed_hosts, uninstalled_hosts = get_installed_hosts(oo_cfg.deployment.hosts, callback_facts)
- if len(installed_hosts) > 0:
- click.echo('Installed environment detected.')
- # This check has to happen before we start removing hosts later in this method
+ installed_hosts, uninstalled_hosts = get_installed_hosts(oo_cfg.deployment.hosts,
+ callback_facts)
+ nodes = [host for host in oo_cfg.deployment.hosts if host.is_node()]
+
+ # Case (1): All uninstalled hosts
+ if len(uninstalled_hosts) == len(nodes):
+ click.echo('All hosts in config are uninstalled. Proceeding with installation...')
+ hosts_to_run_on = list(oo_cfg.deployment.hosts)
+ else:
+ # Case (2): All installed hosts
+ if len(installed_hosts) == len(list(oo_cfg.deployment.hosts)):
+ message = """
+All specified hosts in specified environment are installed.
+"""
+ # Case (3): Some installed, some uninstalled
+ else:
+ message = """
+A mix of installed and uninstalled hosts have been detected in your environment.
+Please make sure your environment was installed successfully before adding new nodes.
+"""
+
+ click.echo(message)
+
+ if not unattended:
+ response = click.confirm('Do you want to (re)install the environment?\n\n'
+ 'Note: This will potentially erase any custom changes.')
+ if response:
+ hosts_to_run_on = list(oo_cfg.deployment.hosts)
+ force = True
+ elif unattended and force:
+ hosts_to_run_on = list(oo_cfg.deployment.hosts)
if not force:
- if not unattended:
- click.echo('By default the installer only adds new nodes '
- 'to an installed environment.')
- response = click.prompt('Do you want to (1) only add additional nodes or '
- '(2) reinstall the existing hosts '
- 'potentially erasing any custom changes?',
- type=int)
- # TODO: this should be reworked with error handling.
- # Click can certainly do this for us.
- # This should be refactored as soon as we add a 3rd option.
- if response == 1:
- force = False
- if response == 2:
- force = True
-
- # present a message listing already installed hosts and remove hosts if needed
- for host in installed_hosts:
- if host.is_master():
- click.echo("{} is already an OpenShift master".format(host))
- # Masters stay in the list, we need to run against them when adding
- # new nodes.
- elif host.is_node():
- click.echo("{} is already an OpenShift node".format(host))
- # force is only used for reinstalls so we don't want to remove
- # anything.
- if not force:
- hosts_to_run_on.remove(host)
-
- # Handle the cases where we know about uninstalled systems
- # TODO: This logic is getting hard to understand.
- # we should revise all this to be cleaner.
- if not force and len(uninstalled_hosts) > 0:
- for uninstalled_host in uninstalled_hosts:
- click.echo("{} is currently uninstalled".format(uninstalled_host))
- # Fall through
- click.echo('\nUninstalled hosts have been detected in your environment. '
- 'Please make sure your environment was installed successfully '
- 'before adding new nodes. If you want a fresh install, use '
- '`atomic-openshift-installer install --force`')
+ message = """
+If you want to force reinstall of your environment, run:
+`atomic-openshift-installer install --force`
+
+If you want to add new nodes to this environment, run:
+`atomic-openshift-installer scaleup`
+"""
+ click.echo(message)
sys.exit(1)
- else:
- if unattended:
- if not force:
- click.echo('Installed environment detected and no additional '
- 'nodes specified: aborting. If you want a fresh install, use '
- '`atomic-openshift-installer install --force`')
- sys.exit(1)
- else:
- if not force:
- new_nodes = collect_new_nodes(oo_cfg)
-
- hosts_to_run_on.extend(new_nodes)
- oo_cfg.deployment.hosts.extend(new_nodes)
-
- openshift_ansible.set_config(oo_cfg)
- click.echo('Gathering information from hosts...')
- callback_facts, error = openshift_ansible.default_facts(oo_cfg.deployment.hosts, verbose)
- if error or callback_facts is None:
- click.echo("There was a problem fetching the required information. See "
- "{} for details.".format(oo_cfg.settings['ansible_log_path']))
- sys.exit(1)
- else:
- pass # proceeding as normal should do a clean install
return hosts_to_run_on, callback_facts
@@ -800,6 +770,49 @@ def set_infra_nodes(hosts):
host.node_labels = "{'region': 'infra'}"
+def run_config_playbook(oo_cfg, hosts_to_run_on, unattended, verbose, gen_inventory):
+ # Write Ansible inventory file to disk:
+ inventory_file = openshift_ansible.generate_inventory(hosts_to_run_on)
+
+ click.echo()
+ click.echo('Wrote atomic-openshift-installer config: %s' % oo_cfg.config_path)
+ click.echo("Wrote Ansible inventory: %s" % inventory_file)
+ click.echo()
+
+ if gen_inventory:
+ sys.exit(0)
+
+ click.echo('Ready to run installation process.')
+ message = """
+If changes are needed please edit the config file above and re-run.
+"""
+ if not unattended:
+ confirm_continue(message)
+
+ error = openshift_ansible.run_main_playbook(inventory_file, oo_cfg.deployment.hosts,
+ hosts_to_run_on, verbose)
+
+ if error:
+ # The bootstrap script will print out the log location.
+ message = """
+An error was detected. After resolving the problem please relaunch the
+installation process.
+"""
+ click.echo(message)
+ sys.exit(1)
+ else:
+ message = """
+The installation was successful!
+
+If this is your first time installing please take a look at the Administrator
+Guide for advanced options related to routing, storage, authentication, and
+more:
+
+http://docs.openshift.com/enterprise/latest/admin_guide/overview.html
+"""
+ click.echo(message)
+
+
@click.group()
@click.pass_context
@click.option('--unattended', '-u', is_flag=True, default=False)
@@ -846,8 +859,8 @@ def cli(ctx, unattended, configuration, ansible_playbook_directory, ansible_log_
# highest), anything below that (we only use debug/warning
# presently) is not logged. If '-d' is given though, we'll
# lower the threshold to debug (almost everything gets through)
- installer_log.setLevel(logging.DEBUG)
- installer_log.debug("Quick Installer debugging initialized")
+ INSTALLER_LOG.setLevel(logging.DEBUG)
+ INSTALLER_LOG.debug("Quick Installer debugging initialized")
ctx.obj = {}
ctx.obj['unattended'] = unattended
@@ -857,8 +870,8 @@ def cli(ctx, unattended, configuration, ansible_playbook_directory, ansible_log_
try:
oo_cfg = OOConfig(ctx.obj['configuration'])
- except OOConfigInvalidHostError as e:
- click.echo(e)
+ except OOConfigInvalidHostError as err:
+ click.echo(err)
sys.exit(1)
# If no playbook dir on the CLI, check the config:
@@ -916,7 +929,7 @@ def uninstall(ctx):
@click.option('--latest-minor', '-l', is_flag=True, default=False)
@click.option('--next-major', '-n', is_flag=True, default=False)
@click.pass_context
-# pylint: disable=too-many-statements
+# pylint: disable=too-many-statements,too-many-branches
def upgrade(ctx, latest_minor, next_major):
oo_cfg = ctx.obj['oo_cfg']
@@ -1013,15 +1026,17 @@ def upgrade(ctx, latest_minor, next_major):
def install(ctx, force, gen_inventory):
oo_cfg = ctx.obj['oo_cfg']
verbose = ctx.obj['verbose']
+ unattended = ctx.obj['unattended']
- if ctx.obj['unattended']:
+ if unattended:
error_if_missing_info(oo_cfg)
else:
oo_cfg = get_missing_info_from_user(oo_cfg)
- check_hosts_config(oo_cfg, ctx.obj['unattended'])
+ check_hosts_config(oo_cfg, unattended)
- print_installation_summary(oo_cfg.deployment.hosts, oo_cfg.settings.get('variant_version', None))
+ print_installation_summary(oo_cfg.deployment.hosts,
+ oo_cfg.settings.get('variant_version', None))
click.echo('Gathering information from hosts...')
callback_facts, error = openshift_ansible.default_facts(oo_cfg.deployment.hosts,
verbose)
@@ -1031,62 +1046,92 @@ def install(ctx, force, gen_inventory):
"Please see {} for details.".format(oo_cfg.settings['ansible_log_path']))
sys.exit(1)
- hosts_to_run_on, callback_facts = get_hosts_to_run_on(
- oo_cfg, callback_facts, ctx.obj['unattended'], force, verbose)
+ hosts_to_run_on, callback_facts = get_hosts_to_run_on(oo_cfg,
+ callback_facts,
+ unattended,
+ force)
# We already verified this is not the case for unattended installs, so this can
# only trigger for live CLI users:
- # TODO: if there are *new* nodes and this is a live install, we may need the user
- # to confirm the settings for new nodes. Look into this once we're distinguishing
- # between new and pre-existing nodes.
if not ctx.obj['unattended'] and len(oo_cfg.calc_missing_facts()) > 0:
confirm_hosts_facts(oo_cfg, callback_facts)
# Write quick installer config file to disk:
oo_cfg.save_to_disk()
- # Write Ansible inventory file to disk:
- inventory_file = openshift_ansible.generate_inventory(hosts_to_run_on)
+ run_config_playbook(oo_cfg, hosts_to_run_on, unattended, verbose, gen_inventory)
- click.echo()
- click.echo('Wrote atomic-openshift-installer config: %s' % oo_cfg.config_path)
- click.echo("Wrote Ansible inventory: %s" % inventory_file)
- click.echo()
- if gen_inventory:
- sys.exit(0)
+@click.command()
+@click.option('--gen-inventory', is_flag=True, default=False,
+ help="Generate an Ansible inventory file and exit.")
+@click.pass_context
+def scaleup(ctx, gen_inventory):
+ oo_cfg = ctx.obj['oo_cfg']
+ verbose = ctx.obj['verbose']
+ unattended = ctx.obj['unattended']
- click.echo('Ready to run installation process.')
+ installed_hosts = list(oo_cfg.deployment.hosts)
+
+ if len(installed_hosts) == 0:
+ click.echo('No hosts specified.')
+ sys.exit(1)
+
+ click.echo('Welcome to the OpenShift Enterprise 3 Scaleup utility.')
+
+ print_installation_summary(installed_hosts,
+ oo_cfg.settings['variant_version'],
+ verbose=False,)
message = """
-If changes are needed please edit the config file above and re-run.
-"""
- if not ctx.obj['unattended']:
- confirm_continue(message)
+---
- error = openshift_ansible.run_main_playbook(inventory_file, oo_cfg.deployment.hosts,
- hosts_to_run_on, verbose)
+We have detected this previously installed OpenShift environment.
- if error:
- # The bootstrap script will print out the log location.
- message = """
-An error was detected. After resolving the problem please relaunch the
-installation process.
+This tool will guide you through the process of adding additional
+nodes to your cluster.
"""
- click.echo(message)
+ confirm_continue(message)
+
+ error_if_missing_info(oo_cfg)
+ check_hosts_config(oo_cfg, True)
+
+ installed_masters = [host for host in installed_hosts if host.is_master()]
+ new_nodes = collect_new_nodes(oo_cfg)
+
+ oo_cfg.deployment.hosts.extend(new_nodes)
+ hosts_to_run_on = installed_masters + new_nodes
+
+ openshift_ansible.set_config(oo_cfg)
+ click.echo('Gathering information from hosts...')
+ callback_facts, error = openshift_ansible.default_facts(oo_cfg.deployment.hosts, verbose)
+ if error or callback_facts is None:
+ click.echo("There was a problem fetching the required information. See "
+ "{} for details.".format(oo_cfg.settings['ansible_log_path']))
sys.exit(1)
- else:
- message = """
-The installation was successful!
-If this is your first time installing please take a look at the Administrator
-Guide for advanced options related to routing, storage, authentication, and
-more:
+ print_installation_summary(oo_cfg.deployment.hosts,
+ oo_cfg.settings.get('variant_version', None))
+ click.echo('Gathering information from hosts...')
+ callback_facts, error = openshift_ansible.default_facts(oo_cfg.deployment.hosts,
+ verbose)
+
+ if error or callback_facts is None:
+ click.echo("There was a problem fetching the required information. "
+ "Please see {} for details.".format(oo_cfg.settings['ansible_log_path']))
+ sys.exit(1)
+
+ # We already verified this is not the case for unattended installs, so this can
+ # only trigger for live CLI users:
+ if not ctx.obj['unattended'] and len(oo_cfg.calc_missing_facts()) > 0:
+ confirm_hosts_facts(oo_cfg, callback_facts)
+
+ # Write quick installer config file to disk:
+ oo_cfg.save_to_disk()
+ run_config_playbook(oo_cfg, hosts_to_run_on, unattended, verbose, gen_inventory)
-http://docs.openshift.com/enterprise/latest/admin_guide/overview.html
-"""
- click.echo(message)
cli.add_command(install)
+cli.add_command(scaleup)
cli.add_command(upgrade)
cli.add_command(uninstall)
diff --git a/utils/src/ooinstall/oo_config.py b/utils/src/ooinstall/oo_config.py
index 697ac9c08..e6bff7133 100644
--- a/utils/src/ooinstall/oo_config.py
+++ b/utils/src/ooinstall/oo_config.py
@@ -436,3 +436,11 @@ class OOConfig(object):
if host.connect_to == name:
return host
return None
+
+ def get_host_roles_set(self):
+ roles_set = set()
+ for host in self.deployment.hosts:
+ for role in host.roles:
+ roles_set.add(role)
+
+ return roles_set
diff --git a/utils/src/ooinstall/openshift_ansible.py b/utils/src/ooinstall/openshift_ansible.py
index 80a79a6d2..764cc1e56 100644
--- a/utils/src/ooinstall/openshift_ansible.py
+++ b/utils/src/ooinstall/openshift_ansible.py
@@ -48,9 +48,6 @@ def set_config(cfg):
def generate_inventory(hosts):
global CFG
- masters = [host for host in hosts if host.is_master()]
- multiple_masters = len(masters) > 1
-
new_nodes = [host for host in hosts if host.is_node() and host.new_host]
scaleup = len(new_nodes) > 0
@@ -61,7 +58,7 @@ def generate_inventory(hosts):
write_inventory_children(base_inventory, scaleup)
- write_inventory_vars(base_inventory, multiple_masters, lb)
+ write_inventory_vars(base_inventory, lb)
# write_inventory_hosts
for role in CFG.deployment.roles:
@@ -106,7 +103,7 @@ def write_inventory_children(base_inventory, scaleup):
# pylint: disable=too-many-branches
-def write_inventory_vars(base_inventory, multiple_masters, lb):
+def write_inventory_vars(base_inventory, lb):
global CFG
base_inventory.write('\n[OSEv3:vars]\n')
@@ -123,7 +120,7 @@ def write_inventory_vars(base_inventory, multiple_masters, lb):
if CFG.deployment.variables['ansible_ssh_user'] != 'root':
base_inventory.write('ansible_become=yes\n')
- if multiple_masters and lb is not None:
+ if lb is not None:
base_inventory.write('openshift_master_cluster_method=native\n')
base_inventory.write("openshift_master_cluster_hostname={}\n".format(lb.hostname))
base_inventory.write(
diff --git a/utils/src/ooinstall/utils.py b/utils/src/ooinstall/utils.py
index eb27a57e4..85a77c75e 100644
--- a/utils/src/ooinstall/utils.py
+++ b/utils/src/ooinstall/utils.py
@@ -1,4 +1,6 @@
import logging
+import re
+
installer_log = logging.getLogger('installer')
@@ -8,3 +10,12 @@ def debug_env(env):
if k.startswith("OPENSHIFT") or k.startswith("ANSIBLE") or k.startswith("OO"):
installer_log.debug("{key}: {value}".format(
key=k, value=env[k]))
+
+
+def is_valid_hostname(hostname):
+ if not hostname or len(hostname) > 255:
+ return False
+ if hostname[-1] == ".":
+ hostname = hostname[:-1] # strip exactly one dot from the right, if present
+ allowed = re.compile(r"(?!-)[A-Z\d-]{1,63}(?<!-)$", re.IGNORECASE)
+ return all(allowed.match(x) for x in hostname.split("."))
diff --git a/utils/test/cli_installer_tests.py b/utils/test/cli_installer_tests.py
index 34392777b..36dc18034 100644
--- a/utils/test/cli_installer_tests.py
+++ b/utils/test/cli_installer_tests.py
@@ -842,7 +842,7 @@ class AttendedCliTests(OOCliFixture):
# interactive with config file and some installed some uninstalled hosts
@patch('ooinstall.openshift_ansible.run_main_playbook')
@patch('ooinstall.openshift_ansible.load_system_facts')
- def test_add_nodes(self, load_facts_mock, run_playbook_mock):
+ def test_scaleup_hint(self, load_facts_mock, run_playbook_mock):
# Modify the mock facts to return a version indicating OpenShift
# is already installed on our master, and the first node.
@@ -866,13 +866,12 @@ class AttendedCliTests(OOCliFixture):
result = self.runner.invoke(cli.cli,
self.cli_args,
input=cli_input)
- self.assert_result(result, 0)
- self._verify_load_facts(load_facts_mock)
- self._verify_run_playbook(run_playbook_mock, 3, 2)
+ # This is testing the install workflow so we want to make sure we
+ # exit with the appropriate hint.
+ self.assertTrue('scaleup' in result.output)
+ self.assert_result(result, 1)
- written_config = read_yaml(self.config_file)
- self._verify_config_hosts(written_config, 3)
@patch('ooinstall.openshift_ansible.run_main_playbook')
@patch('ooinstall.openshift_ansible.load_system_facts')
@@ -897,30 +896,30 @@ class AttendedCliTests(OOCliFixture):
written_config = read_yaml(config_file)
self._verify_config_hosts(written_config, 3)
- #interactive with config file and all installed hosts
- @patch('ooinstall.openshift_ansible.run_main_playbook')
- @patch('ooinstall.openshift_ansible.load_system_facts')
- def test_get_hosts_to_run_on(self, load_facts_mock, run_playbook_mock):
- mock_facts = copy.deepcopy(MOCK_FACTS)
- mock_facts['10.0.0.1']['common']['version'] = "3.0.0"
- mock_facts['10.0.0.2']['common']['version'] = "3.0.0"
-
- cli_input = build_input(hosts=[
- ('10.0.0.1', True, False),
- ],
- add_nodes=[('10.0.0.2', False, False)],
- ssh_user='root',
- variant_num=1,
- schedulable_masters_ok=True,
- confirm_facts='y',
- storage='10.0.0.1',)
-
- self._verify_get_hosts_to_run_on(mock_facts, load_facts_mock,
- run_playbook_mock,
- cli_input,
- exp_hosts_len=2,
- exp_hosts_to_run_on_len=2,
- force=False)
+# #interactive with config file and all installed hosts
+# @patch('ooinstall.openshift_ansible.run_main_playbook')
+# @patch('ooinstall.openshift_ansible.load_system_facts')
+# def test_get_hosts_to_run_on(self, load_facts_mock, run_playbook_mock):
+# mock_facts = copy.deepcopy(MOCK_FACTS)
+# mock_facts['10.0.0.1']['common']['version'] = "3.0.0"
+# mock_facts['10.0.0.2']['common']['version'] = "3.0.0"
+#
+# cli_input = build_input(hosts=[
+# ('10.0.0.1', True, False),
+# ],
+# add_nodes=[('10.0.0.2', False, False)],
+# ssh_user='root',
+# variant_num=1,
+# schedulable_masters_ok=True,
+# confirm_facts='y',
+# storage='10.0.0.1',)
+#
+# self._verify_get_hosts_to_run_on(mock_facts, load_facts_mock,
+# run_playbook_mock,
+# cli_input,
+# exp_hosts_len=2,
+# exp_hosts_to_run_on_len=2,
+# force=False)
#interactive multimaster: one more node than master
@patch('ooinstall.openshift_ansible.run_main_playbook')
diff --git a/utils/test/fixture.py b/utils/test/fixture.py
index a883e5c56..62135c761 100644
--- a/utils/test/fixture.py
+++ b/utils/test/fixture.py
@@ -138,8 +138,8 @@ class OOCliFixture(OOInstallFixture):
written_config = read_yaml(config_file)
self._verify_config_hosts(written_config, exp_hosts_len)
- if "Uninstalled" in result.output:
- # verify we exited on seeing uninstalled hosts
+ if "If you want to force reinstall" in result.output:
+ # verify we exited on seeing installed hosts
self.assertEqual(result.exit_code, 1)
else:
self.assert_result(result, 0)
@@ -156,7 +156,7 @@ class OOCliFixture(OOInstallFixture):
#pylint: disable=too-many-arguments,too-many-branches,too-many-statements
def build_input(ssh_user=None, hosts=None, variant_num=None,
add_nodes=None, confirm_facts=None, schedulable_masters_ok=None,
- master_lb=None, storage=None):
+ master_lb=('', False), storage=None):
"""
Build an input string simulating a user entering values in an interactive
attended install.
@@ -204,11 +204,11 @@ def build_input(ssh_user=None, hosts=None, variant_num=None,
i += 1
# You can pass a single master_lb or a list if you intend for one to get rejected:
- if master_lb:
- if isinstance(master_lb[0], list) or isinstance(master_lb[0], tuple):
- inputs.extend(master_lb[0])
- else:
- inputs.append(master_lb[0])
+ if isinstance(master_lb[0], list) or isinstance(master_lb[0], tuple):
+ inputs.extend(master_lb[0])
+ else:
+ inputs.append(master_lb[0])
+ if master_lb[0]:
inputs.append('y' if master_lb[1] else 'n')
if storage:
@@ -248,6 +248,7 @@ def build_input(ssh_user=None, hosts=None, variant_num=None,
inputs.extend([
confirm_facts,
'y', # lets do this
+ 'y',
])
return '\n'.join(inputs)